1. Alarm mode: with PSTN and GSM network alarm, GSM network with

GPRS function, remote arm and disarm panel through CMS or SMS. CID protocol, SMS notification, the priority of PSTN and GSM network is Optional.

2. With a new large-screen, full-touch buttons, LCD graphic display steps, work status, Alarm process easy and intuitive.

3. The full English voice prompting operation: all local or remote operation, alarm information, event log view.

4. GSM-hook and voice telephone with intercom function.

5. All alarm information can be programmed for the following settings:0,does not send any information. 1,Send only SMS.

2,Only call users. 3,SMS + call user . 4,CMS only. 5,CMS + SMS. 6,CMS + call user. 7,CMS + SMS + call user.

6.Sleep mode: Under sleep mode, all the lights, backlight, voice and remind tone are disabled.

7.Alarm panel under idle status is equivalent to a cellphone, you can call through the GSM network for balance inquiries.

8.The associated zone: 4 groups associated zone, three kinds of association patterns, can effectively reduce false alarm or for other functions.

9.PGM output: With a programmed output port, followed by five kinds of alarm events output.

10.The doorbell Audio Optional: 1. Ding Dong 2 Welcome 3. Recording 4. Dee-Dee~

11.Remote phone operation:dialing by telephone offsite, after password verification, you can arm, disarm, listen-in premise, system status query and electrical switches controls and other operations.

12.Voice Alarm: When panel alarm, it will automatically dial the preset user phone numbers to report alarm information then you can remote control the panel after enter user passwords.

13. wireless zones, each wireless zone can automatically learn the codes or be coded manually via the keyboard.

14. 8 wired zones, User can set the circuit type and speed of response, support N.O, N.C.

15. Enable enroll total 8 wireless remote, 8 electronic switch, 16 Rfid tags, 1 pc of wireless doorbell and unlimited for quantity of one way wireless siren.

16. 6 follow me phone#(voice alarm receiving phone#), 2 for CMS, 4 for private alarm receiving.

17. Status inspection functions: enable record and inquiry 150 alarm event messages. Like the time when happens anti-tamper alarm, detector alarm, tel-line off, arm, disarm, system setting, battery low voltage ect. And also can inquiry the zone number and alarm type.

18. Timing arm and disarm: 4 sets of timing arm and disarm time.

19. Electrical switches control:  User can remote switch on/off via phone or SMS, also can be controlled manually through the local alarm panel.

20. Zone programmable: factory preset for each zone type. Users can modify all the zone type according to the actual needs .

21. Clock: Built-in full automatic calendar clock, set to local time consistent.

22. Password access management: the panel has one administrator password 16 user password, The administrator password primarily for system administrators to set up the alarm system; The user passwords for users in the day-to-day use such arm/ disarm, remote operation. The administrator password, user password can be freely modified.

23. For CMS networking alarm, depending on the number of users, the user can set four, six or eight user codes(account number).

24. Zone type identification:After an alarm is triggered, the alarm zone number displayed on the LCD screen of the panel, also can send the detailed report to CMS which includes alarm locations and zone types.

25.Al-proof function :if try to cut off the wire between wired detector and panel or cut off the tel line which.

26.The tampering alarm: cut the cable between wired detectors and the panel will trigger alarm, the telephone line cut will automatically trigger siren alarm. When someone deliberately dismantled the panel, it will alarm when triggering tamper switch at the back of the panel.

27. Anti-tamper function: when someone try to remove panel deliberately, panel will make alarm immediately.

28. CMS communications test: The panel will send a message to CMS at the pre-set time interval to inspect the communication if normal.

29. Siren options:
Built-in siren, external wired siren, Wireless siren. All sirens can be programmed as enabled/disable when alarms.

30. The voice speaker volume adjustment: adjust the volume by a rotary switch on the panel.

31. Wireless repeater function:
can extend the distance between the detector and the panel by adding a wireless repeater of our company.

32. The wireless detector low battery prompted:
Detectors will send status report to the panel every 1-3 hours, the corresponding zone number and the battery voltage symbol will be displayed on the LCD screen and also will report to CMS.