Name£ºThree Beam Wired Wireless Perimeter Alarm System
Model£ºWS2-GP10B3
- Function
- Parameters
- External
Description
Name: GSM Perimeter Alarm System
Model: GP10B3
Powerful Three Beams Perimeter Alarm
GP10B3 Three Beam Perimeter Security alarm system come with a pair of three beam Synchronized Beams sensor (four beams),the three Beam
ensures minimum false alarm possibility against falling leaves, birds, small
animals etc. This beam sensor comes with laser beam alignment function which reduces the installation time and along with that increases the workability of the device. The Beam sensor comes with built-in Optical Viewfinder for easy and quick alignment. The Beam detector connects alarm panel via Wireless Frequency (433MHz) or cables (wired), The alarm panel is new design touchpad LCD burglar alarm system support landline and GSM Module (SIM Card).
When the beams are activated they will send signal to alarm panel, the alarm panel will make a phone call via landline, or use GSM module for auto dialing and sending text message.
Due to alarm panel integrated with GSM module, this system is also suitable for remote area where without landline equiped
The simple method of setting the system up as follows:
1) Insert a Telephoneline or a Valid Sim Card. .
2) Wall Mount the Alarm System 3) Plug in the AC/DC adapter to AC power socket
4) Turn the On/Off switch on of the power supply for control panel.
5) Program the system using the built in keypad (not need to press, just touch).
6) In the program menu, choose the zone name, type, group name, then touch learn (study) button on the rear of the detectros until a "success" appear on the LCD.
7) Repeat operation 6 & 7 for each detector to make sure they are programmed.
8) Test by setting the alarm and activating before put into use.
Main Features For Perimeter Alarm System:
0. Slim elegant design Alarm Panel with smart intelligent Touchpad, support PSTN (Lanline) and GSM (Cellular Technology).
1. Powerful Alarm System include interior Wireless PIR Motion Detector, Wireless Door/Window Magnetic Contact, exterior Wireless/Wired Active Infrared Beam Detector for protecting your inside and outside area.
2. 29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes or wireless keypads per zone)
3. 8 more wired zones (Each zone supports 1 wired sensor)
4. Can dial up to 5 phone numbers in sequence, 5 SMS mobilephone numbers.
5. Call and SMS both are compatiable with ADEMCO Contact ID.
6. Arm\ Disarm the system by: Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely by phones.
7. Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast "bi bi bi")
8. Support wireless "ding-dong" doorbell function (need to buy extra doorbell from us)
9. Non-volatile chip, information stored automatically when off power
10. Record up to a 10 second voice message, When alarm is triggered, it will automatically auto play the voice message over the phone.
11. Alarm Sounds if Phone Line is Cut
12. Remembers programming settings when power is disconnected
13. Available in both AC\DC with Low-voltage Indicators.
14. Learn sensors to alarm host panel, very easy operation.
15. Supports Door. Window. Motion. Smoke. Heat. Glass Break. Gas Leak. Carbon Monoxide Detector. etc.
16. Support ADEMCO Contact ID, can connect to CMS (Central Monitoring Station).
Beam Alarm System Technical Information:
- Working voltage:100~240VAC
- Operating power: 9-15VDC
- GSM Frequency:850/900/1800/1900MHZ
- Wireless Frequency:433MHZ / 868MHZ
- Static current: ≤ 80mA
- Alarm current: ≤ 500mA
- GSM Cellular Transmission Power: 2W
- Operating environment: Temperature: -10?-50?; Humidity:<90%
- Maximum available quantity of keychain (remote controllers) : 4 PCS
- Maximum available quantity of wireless sensors: 116 PCS
- Dimension:180*120*50(mm)
Infrared Beam Specification:
E-50/B
|
E-100/B
|
E-150/B
|
E-200/B
|
E-250/B
|
|
Outdoor detection distance
|
50m
|
100m
|
150m
|
200m
|
250m
|
Indoor detection distance
|
150m
|
300m
|
450m
|
600m
|
750m
|
Number of beams
|
3
|
||||
Response speed
|
35~700m/s
|
||||
Alarm output-normal
|
Normally close and normally open(NC&NO)contact capacity AV/DC 30V/0.5mA
|
||||
Alarm linkage
|
√
|
||||
Working voltage
|
DC 13.8~24V;AC 11~18V
|
||||
Working current
|
60mA
|
65mA
|
65mA
|
65mA
|
70mA
|
Long-life mode
|
40mA
|
32mA
|
32mA
|
32mA
|
40mA
|
Environment
|
temperature:-25?~55? ; humidity:5%—95% (RH)
|
||||
Tamper output
|
Normally close(NC) contact capacity AV/DC 24V/0.5mA
|
||||
Adjust angle
|
Horizontal:180°(±90°) ; Vertical:±10°
|
||||
Case material
|
Germany PC
|
||||
Remark
|
The end with “B” is BUS output system
|